For in-plants, the end goal is always to better provide for your parent organization. So, why not offer apparel?
Think about it, if someone already comes to you to print jobs, why not make sure they don’t need to go anywhere else for T-shirts, hats, and other promotional goodies? According to research from In-plant Impressions, 14% of in-plants already provide apparel decoration. Perhaps it’s time for you to look into this new service too.

Apparel decoration generates about 40% of the revenue at Utah State University Aggie Print and Mail. The in-plant sometimes runs two shifts to meet the demand. Here, student worker Brooklyn runs the Tajima TFMX-IIC1506 embroidery machine. | Credit: Utah State University
At Utah State University, apparel has grown into a substantial part of the in-plant’s business. Greg Christiansen, director of Aggie Print and Mail for the university, estimates that it generates 35%-40% of the operation’s revenue, following about eight years of steadily adding capabilities.
“We used to just be a ‘print shop.’ In fact, mostly offset print,” he says. As that work tapered off, he knew the Logan, UT, in-plant needed to replace it by adding new services.
“So that’s when we started adding more wide-format, and we started adding engraving,” Christiansen says. “Apparel was just a natural next up for us.”

Student worker Kaycee operates the shop's STS XPD-924D and Powder Shaker S20 direct-to-film printer, helping the in-plant with full-color and quick turnaround jobs. | Credit: Utah State University
The shop began with a screen printing press, then added embroidery within a year or two, and later introduced direct-to-garment printing. More recently, direct-to-film printing has largely displaced its DTG work.
“We currently do all apparel in-house. So that’s why we added the other pieces, because screen print allowed us to do one element, and then embroidery [produced] the nicer apparel, polos, those kind of things,” he explains. “And then our direct-to-film gives us that next level up for some of the full-color stuff or short-run quick stuff.”
Before getting into screen printing, Christiansen secured an important customer: the campus bookstore. His proposal addressed its need to purchase shirts in large quantities.

From left: Tina and student employee Cambri work on the in-plant's M&R Sportsman EX screen printer to create apparel for customers all around campus. | Credit: Utah State University
“I basically said, ‘I will inventory the shirts, but I’ll print at a lower rate so that you don’t have to order 30,000 shirts. You can just order 500 at a time or whatever.’ And that was a win-win for them,” Christiansen says.
Fast-forward to today, and the apparel customer list has grown beyond the bookstore. The in-plant also provides apparel for athletics, student events, and even some outside work for downtown businesses.
That anchor business helped establish the operation, but learning unfamiliar processes took patience. Employees stepped forward to learn the equipment, and the shop sought help from another university with decoration experience.

The in-plant uses two Hotronic Fusion IQ heat presses to keep up with its growing apparel revenue. Here, student employee Kaycee operates one of the presses. | Credit: Utah State University
“It was a learning curve, right? It’s a different world,” Christiansen says. “And same thing with the embroidery. We found someone that would [help] us. We got the right equipment. And then we just had to be patient on the learning curve.”
The initial volume of orders was modest, he says, but by the second year, the in-plant was very busy with apparel. Today, Christiansen sometimes runs two shifts to meet demand.
Apparel Opens New Doors for Utah State
For in-plants, the end goal is always to better provide for your parent organization. So, why not offer apparel?
Think about it, if someone already comes to you to print jobs, why not make sure they don’t need to go anywhere else for T-shirts, hats, and other promotional goodies? According to research from In-plant Impressions, 14% of in-plants already provide apparel decoration. Perhaps it’s time for you to look into this new service too.
Apparel decoration generates about 40% of the revenue at Utah State University Aggie Print and Mail. The in-plant sometimes runs two shifts to meet the demand. Here, student worker Brooklyn runs the Tajima TFMX-IIC1506 embroidery machine. | Credit: Utah State University
At Utah State University, apparel has grown into a substantial part of the in-plant’s business. Greg Christiansen, director of Aggie Print and Mail for the university, estimates that it generates 35%-40% of the operation’s revenue, following about eight years of steadily adding capabilities.
“We used to just be a ‘print shop.’ In fact, mostly offset print,” he says. As that work tapered off, he knew the Logan, UT, in-plant needed to replace it by adding new services.
“So that’s when we started adding more wide-format, and we started adding engraving,” Christiansen says. “Apparel was just a natural next up for us.”
Student worker Kaycee operates the shop's STS XPD-924D and Powder Shaker S20 direct-to-film printer, helping the in-plant with full-color and quick turnaround jobs. | Credit: Utah State University
The shop began with a screen printing press, then added embroidery within a year or two, and later introduced direct-to-garment printing. More recently, direct-to-film printing has largely displaced its DTG work.
“We currently do all apparel in-house. So that’s why we added the other pieces, because screen print allowed us to do one element, and then embroidery [produced] the nicer apparel, polos, those kind of things,” he explains. “And then our direct-to-film gives us that next level up for some of the full-color stuff or short-run quick stuff.”
Before getting into screen printing, Christiansen secured an important customer: the campus bookstore. His proposal addressed its need to purchase shirts in large quantities.
From left: Tina and student employee Cambri work on the in-plant's M&R Sportsman EX screen printer to create apparel for customers all around campus. | Credit: Utah State University
“I basically said, ‘I will inventory the shirts, but I’ll print at a lower rate so that you don’t have to order 30,000 shirts. You can just order 500 at a time or whatever.’ And that was a win-win for them,” Christiansen says.
Fast-forward to today, and the apparel customer list has grown beyond the bookstore. The in-plant also provides apparel for athletics, student events, and even some outside work for downtown businesses.
That anchor business helped establish the operation, but learning unfamiliar processes took patience. Employees stepped forward to learn the equipment, and the shop sought help from another university with decoration experience.
The in-plant uses two Hotronic Fusion IQ heat presses to keep up with its growing apparel revenue. Here, student employee Kaycee operates one of the presses. | Credit: Utah State University
“It was a learning curve, right? It’s a different world,” Christiansen says. “And same thing with the embroidery. We found someone that would [help] us. We got the right equipment. And then we just had to be patient on the learning curve.”
The initial volume of orders was modest, he says, but by the second year, the in-plant was very busy with apparel. Today, Christiansen sometimes runs two shifts to meet demand.
Related story: Web-to-Print Helps Utah State University Grow and Evolve